Projekt

Allgemein

Profil

Aktionen

ERPNext14 » Historie » Revision 19

« Zurück | Revision 19/64 (Vergleich) | Weiter »
Jeremias Keihsler, 21.02.2023 12:54


ERPNext 14

Bitnami based on Debian 11

out of the box ERPNext is installed. This describes what else can/needs to be done:

convert VirtualBox-ova to be used with KVM

untar .ova

tar xvf bitnami-erpnext-14.11.0-0-linux-vm-debian-11-x86_64-nami.ova

convert .vmdk to .qcow2 while showing 'progress'

qemu-img convert -p -f vmdk -O qcow2 \
  bitnami-erpnext-14.11.0-0-linux-vm-debian-11-x86_64-nami-disk1.vmdk \
  bitnami-erpnext-14.11.0-0-linux-vm-debian-11-x86_64-nami-disk1.qcow2

this is a sample virsh dumpxml with a bridged interface

<domain type="kvm" id="7">
  <name>bitnami_erpnext</name>
  <uuid>acf57964-b3d8-4148-9391-b4552a72a32c</uuid>
  <metadata>
    <libosinfo:libosinfo>
    <libosinfo:os id="http://debian.org/debian/11"/>
    </libosinfo:libosinfo>
  </metadata>
  <memory unit="KiB">4194304</memory>
  <currentMemory unit="KiB">4194304</currentMemory>
  <vcpu placement="static">2</vcpu>
  <resource>
    <partition>/machine</partition>
  </resource>
  <os>
    <type arch="x86_64" machine="pc-i440fx-rhel7.0.0">hvm</type>
    <boot dev="hd"/>
    <bootmenu enable="yes"/>
  </os>
  <features>
    <acpi/>
    <apic/>
  </features>
  <cpu mode="host-passthrough" check="none">
    <topology sockets="1" cores="1" threads="2"/>
  </cpu>
  <clock offset="utc">
    <timer name="rtc" tickpolicy="catchup"/>
    <timer name="pit" tickpolicy="delay"/>
    <timer name="hpet" present="no"/>
  </clock>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>destroy</on_crash>
  <pm>
    <suspend-to-mem enabled="no"/>
    <suspend-to-disk enabled="no"/>
  </pm>
  <devices>
    <emulator>/usr/libexec/qemu-kvm</emulator>
    <disk type="file" device="disk">
      <driver name="qemu" type="qcow2"/>
      <source file="/../libvirt/images/bitnami-erpnext-14.11.0-0-linux-vm-debian-11-x86_64-nami-disk1.qcow2"/>
      <backingStore/>
      <target dev="vdb" bus="virtio"/>
      <alias name="virtio-disk1"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x0b" function="0x0"/>
    </disk>
    <controller type="usb" index="0" model="ich9-ehci1">
      <alias name="usb"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x05" function="0x7"/>
    </controller>
    <controller type="usb" index="0" model="ich9-uhci1">
      <alias name="usb"/>
      <master startport="0"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x05" function="0x0" multifunction="on"/>
    </controller>
    <controller type="usb" index="0" model="ich9-uhci2">
      <alias name="usb"/>
      <master startport="2"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x05" function="0x1"/>
    </controller>
    <controller type="usb" index="0" model="ich9-uhci3">
      <alias name="usb"/>
      <master startport="4"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x05" function="0x2"/>
    </controller>
    <controller type="pci" index="0" model="pci-root">
      <alias name="pci.0"/>
    </controller>
    <controller type="virtio-serial" index="0">
      <alias name="virtio-serial0"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x06" function="0x0"/>
    </controller>
    <controller type="scsi" index="0" model="virtio-scsi">
      <alias name="scsi0"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x0a" function="0x0"/>
    </controller>
    <interface type="bridge">
      <mac address="52:54:00:29:00:87"/>
      <source bridge="br0"/>
      <target dev="vnet1"/>
      <model type="virtio"/>
      <alias name="net0"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x03" function="0x0"/>
    </interface>
    <serial type="pty">
      <source path="/dev/pts/9"/>
      <target type="isa-serial" port="0">
        <model name="isa-serial"/>
      </target>
      <alias name="serial0"/>
    </serial>
    <console type="pty" tty="/dev/pts/9">
      <source path="/dev/pts/9"/>
      <target type="serial" port="0"/>
      <alias name="serial0"/>
    </console>
    <channel type="unix">
      <source mode="bind" path="/var/lib/libvirt/qemu/channel/target/domain-7-bitnami_erpnext/org.qemu.guest_agent.0"/>
      <target type="virtio" name="org.qemu.guest_agent.0" state="disconnected"/>
      <alias name="channel0"/>
      <address type="virtio-serial" controller="0" bus="0" port="1"/>
    </channel>
    <channel type="spicevmc">
      <target type="virtio" name="com.redhat.spice.0" state="disconnected"/>
      <alias name="channel1"/>
      <address type="virtio-serial" controller="0" bus="0" port="2"/>
    </channel>
    <input type="tablet" bus="usb">
      <alias name="input0"/>
      <address type="usb" bus="0" port="1"/>
    </input>
    <input type="mouse" bus="ps2">
      <alias name="input1"/>
    </input>
    <input type="keyboard" bus="ps2">
      <alias name="input2"/>
    </input>
    <graphics type="spice" port="5901" autoport="yes" listen="127.0.0.1">
      <listen type="address" address="127.0.0.1"/>
    </graphics>
    <sound model="ich6">
      <alias name="sound0"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x04" function="0x0"/>
    </sound>
    <video>
      <model type="qxl" ram="65536" vram="65536" vgamem="16384" heads="1" primary="yes"/>
      <alias name="video0"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0"/>
    </video>
    <redirdev bus="usb" type="spicevmc">
      <alias name="redir0"/>
      <address type="usb" bus="0" port="2"/>
    </redirdev>
    <redirdev bus="usb" type="spicevmc">
      <alias name="redir1"/>
      <address type="usb" bus="0" port="3"/>
    </redirdev>
    <memballoon model="virtio">
      <alias name="balloon0"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x08" function="0x0"/>
    </memballoon>
    <rng model="virtio">
      <backend model="random">/dev/urandom</backend>
      <alias name="rng0"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x09" function="0x0"/>
    </rng>
  </devices>
  <seclabel type="dynamic" model="selinux" relabel="yes">
    <label>system_u:system_r:svirt_t:s0:c328,c377</label>
    <imagelabel>system_u:object_r:svirt_image_t:s0:c328,c377</imagelabel>
  </seclabel>
  <seclabel type="dynamic" model="dac" relabel="yes">
    <label>+107:+107</label>
    <imagelabel>+107:+107</imagelabel>
  </seclabel>
</domain>

set static IP address

taken from https://docs.bitnami.com/virtual-machine/faq/configuration/configure-static-address/

check link and current IPs

sudo ifconfig
cd /etc/systemd/network
sudo touch 25-wired.network

add following lines

[Match]
Name=enp0s3

[Network]
Address=HOST-IP-ADDRESS
Gateway=GATEWAY-IP-ADDRESS

restart service

sudo systemctl restart systemd-networkd.service

activate SSH-Server

taken from https://docs.bitnami.com/virtual-machine/faq/get-started/enable-ssh/

sudo rm -f /etc/ssh/sshd_not_to_be_run
sudo systemctl enable ssh
sudo systemctl start ssh

... password-based SSH auth (are you serious?)

maybe ok for testing ..
taken from https://docs.bitnami.com/virtual-machine/faq/get-started/enable-ssh-password/

edit /etc/ssh/sshd_config and add/modify the following line

  PasswordAuthentication yes

restart SSH server

  sudo /etc/init.d/ssh force-reload
  sudo /etc/init.d/ssh restart

install 'dialog'

sudo apt install dialog

modify keyboard layout

taken from https://docs.bitnami.com/virtual-machine/faq/configuration/configure-keyboard/

  sudo apt-get install keyboard-configuration console-setup
  sudo dpkg-reconfigure keyboard-configuration
  sudo systemctl restart keyboard-setup

alias ll

for everyone .. taken from https://www.server-world.info/en/note?os=Debian_11&p=initial_conf&f=2

sudo vim /etc/profile.d/command_alias.sh
# create new file
# add alias you'd like to set
alias ll='ls $LS_OPTIONS -l'
# alias l='ls $LS_OPTIONS -lA'
# alias rm='rm -i'
# alias cp='cp -i'
# alias mv='mv -i'
source /etc/profile.d/command_alias.sh

Install the Wkhtmltopdf extension

taken from https://docs.bitnami.com/aws/apps/erpnext/configuration/install-wkhtmltopdf/

find /opt/bitnami/common/bin -name fc-* | sudo xargs -I {} mv {} {}.bak
sudo apt-get install zlib1g fontconfig libxrender1 libfreetype6 libxext6 libx11-6

Download the latest version of the package from the Wkhtmltopdf project releases page and install it. Replace the X.Y.Z and PLATFORM placeholders with the correct version and platform strings from the release filename.

https://github.com/wkhtmltopdf/wkhtmltopdf/releases/

as of 2023-02-16 https://github.com/wkhtmltopdf/packaging/releases/download/0.12.6-1/wkhtmltox_0.12.6-1.buster_amd64.deb

wget https://github.com/wkhtmltopdf/wkhtmltopdf/releases/download/X.Y.Z/wkhtmltox_X.Y.Z.PLATFORM.deb
sudo apt install -f ./wkhtmltox_X.Y.Z.PLATFORM.deb
sudo /opt/bitnami/ctlscript.sh restart

Troubleshooting PDF formating issues -- didn't resolve it yet 2023-02-21

taken from https://discuss.frappe.io/t/pdf-alignment-problem/34425/7

set the IP-adr. in site_config.json

vim /opt/bitnami/erpnext/frappe-bench/sites/erpnext/site_config.json

replace localhost with the hostname-ip

 "host_name": "'http://192.168.4.13'" 

Troubleshooting

If you experience issues with display resolution on Linux platforms, they could be related to the xfonts-75dpi or xfonts-100dpi packages. Uninstall them by executing:

sudo dpkg --remove --force-depends xfonts-75dpi
sudo dpkg --remove --force-depends xfonts-100dpi

install weasyprint

taken from https://packages.debian.org/bullseye/weasyprint

sudo apt install weasyprint

migrate ERPNext to new server

backup

cd /opt/bitnami/erpnext/frappe-bench
bench backup-all-sites

files are saved very deep

cd /opt/bitnami/erpnext/frappe-bench/sites/erpnext/private/backups/

restore

copy files to new server into /home/bitnami

gunzip yyyymmdd_hhmmss-erpnext-database.sql.gz

connect to MariaDB (password is the same as application-password)
taken from https://docs.bitnami.com/general/apps/erpnext/get-started/connect-mariadb/

mysql -u root -p
DROP DATABASE bitnami_erpnext;
\q

as of 2023-02-07 restore seems not to work following the instructions

cd /opt/bitnami/erpnext/frappe-bench/
bench restore /home/bitnami

vanilla install based on Ubuntu

backup and load into test-site

To create a staging site from a production site backup:

cd <frappe/erpnext Verzeichnis>
mkdir ~/backup/

bench --site prod.example.net set-maintenance-mode on
bench --site prod.example.net set-config pause_scheduler 1
bench --site prod.example.net backup --with-files --compress --backup-path ~/backup/ 
# notice: Database Public & Private from stdout
bench --site prod.example.net set-maintenance-mode off

restore into other Staging instance:

bench new-site staging.example.net
bench --site staging.example.net set-maintenance-mode on

bench --site staging.example.net restore ~/backup/YYYYMMDD_HHMMSS-prod.example.net-database.sql.gz
  --with-public-files  ~/backup/YYYYMMDD_HHMMSS-prod.example.net-files.tar.gz
  --with-private-files ~/backup/YYYYMMDD_HHMMSS-prod.example.net-private-files.tar.gz
  MySQL root password:

bench --site staging.example.net mute_emails true
bench --site staging.example.net set-maintenance-mode off
rm -r ~/backup/

Von Jeremias Keihsler vor mehr als 1 Jahr aktualisiert · 19 Revisionen